Rancang Bangun Media Pembelajaran Konveyor Sistem SLG Berbasis HMI

Ikhwana Filla; Irwandi; Ar ade jumadil; Irvawansyah; Syahrul Mustafa

doi:10.61141/joule.v5i2.804

Authors

Ikhwana Filla
Irwandi
Ar ade jumadil
Irvawansyah
Syahrul Mustafa

DOI:

https://doi.org/10.61141/joule.v5i2.804

Keywords:

Prototype sortir, Lift barang, PLC, inductive proximity, IR proximity

Abstract

The study intended to create a learning medium tools for sorting systems, elevators, gates based on PLC, and to control systems for sorting objects, freight elevators and gates. The research methods applied to this study are problem identification, toolmaking, design, and testing. Based on tests conducted by the system can detect objects by using proximity infrared sensor by a range of 3 centimetres – 8 centimeter and can be regulated according to need and proximity inductive sensors with a range of 0-4 mm. this media use Infrared sensor range 8 cm and 5 cm while the inductive sensor used by the range 4 mm. Infrared sensors are also used to detect altitude in objects to be sorted. These media control systems are controlled using PLC. Programs for this medium can be created with the language program leadder diagram. For PLC and PC communication using LAN cables. The learning media uses 5 electric motor, three 5 VDC electric motor those are a gate electric motor, a sorting electric motor, and a booster electric motor as well as two 12 VDC electric motor those are conveyor and a freight elevator, so that to connect the SLG learning media to the PLC an additional relay is needed.

References

zaini, “trainer modul praktikum sistem kontrol ( rangkaian 2 arah putaran motor dan rangkaian motor secara berurutan ),” pp. 2–8, 2020.

a. b. wurianto, “pengembangan pendidikan vokasi bidang sosio-humaniora menghadapi revolusi industri era 4.0,” pros. semin. nas. vokasi indones., vol. 1, no. november, pp. 89–94, 2018, [online]. available: https://www.researchgate.net/publication/328926920

_pengembangan_pendidikan_vokasi_bidang_sosio-humaniora_menghadapi_revolusi_industri_era_4.

a. junaidi and bambang suprianto, “pengembangan trainer dan job sheet programmable logic controller( plc ) pada mata pelajaran instalasi motor listrik di smk semen gresik akhmad junaidi bambang suprianto abstrak,” no. 6, pp. 315–324, 2020.

i. irvawansyah and m. mukhlisin, “rancang bangun sistem sortir benda berbasis programable logic control (plc),” patria artha technol. j., vol. 3, no. 2, pp. 36–40, 2019, doi: 10.33857/patj.v3i2.243. [5] a. goeritno and s. pratama, “rancang-bangun prototipe sistem kontrol berbasis programmable logic controller untuk pengoperasian miniatur penyortiran material,” j. rekayasa elektr., vol. 16, no. 3, pp. 198–206, 2020, doi:10.17529/jre.v16i3.14905.

g. musyahar, m. z. fahmi, and k. abdi, “perancangan traffic light simpang tiga dengan menggunakan plc cpm1a 40cdr_a,” cahaya bagaskara j. …, vol. 6, no. 2, pp. 23–29, 2021, [online]. available: https://jurnal.umpp.ac.id/index.php/cahaya_bagask ara/article/view/1026%0ahttps://jurnal.umpp.ac.id/ index.php/cahaya_bagaskara/article/download/102 6/760.

m. a. a. wiraguna, n. k. d. natalia, r. d. bintang, and i. g. r. a. nugraha, “otomatisasi dalam pandemi dengan sensor proximity,” politek. negeri bali, no. december, 2020.

jumriady, awal syahrani sirajuddin, and naharuddin, “15312-47272-1-sm,” peranc. conveyorberdasarkan berat berbas. arduino, vol.

, no. 2, pp. 1018–1024, 2019.

suwitno, “mendesain rangkaian power supply pada rancang bangun,” j. electr. technol., vol. 1, no. 1, pp.1–7, 2016.