Desain dan Simulasi Kontrol Elektropneumatik Pada Mesin Sealer Cup Semi Otomatis

Penulis

  • Agnes Sholikhah
  • Ardit Mauladana
  • Ahmad Navis Hidayat
  • M Alfa Reza
  • Edy Setiawan Politeknik Perkapalan Negeri Surabaya

Kata Kunci:

Cascade, Elektropneumatik, Fluidsim, Sistem Pneumatik, Boolean

Abstrak

Pneumatics has advantages in terms of response speed, cleanliness, and ease of maintenance, making it suitable for application in small to medium-scale automation systems. This study aims to design and simulate a semi-automatic cup sealing machine based on a pneumatic system using a cascade control logic approach. The background of this research is based on the increasing demand from the beverage packaging industry for efficient and partially automated cup sealing systems to enhance productivity. The methods employed include system analysis, formulation of control logic in the form of Boolean equations, and grouping of actuator work sequences using the cascade method to ensure a systematic and structured workflow. The system consists of three pneumatic actuators (pistons A, B, and C), a position sensor, a timer, and a 5/2-way two-position five-port pneumatic valve suitable for a two-channel system. Simulation and performance validation of the system were conducted using FluidSim software. Simulation results show that all components operate according to the designed sequence, with synchronised and timely actuator movements without logic conflicts. The implementation of cascade logic proved effective in regulating the system's operational sequence in a stable and efficient manner. This study concludes that a cascade logic-based pneumatic control system has the potential to enhance the efficiency of semi-automated systems and can be further developed towards full automation in industrial applications.

Referensi

Adiyat, R. (2017). Konstruksi Diagram Ladder dengan Metoda Cascade untuk. TUGAS AKHIR- Teknik Elektro Institute Teknologi Sepuluh Nopember, 15-18

Akhmad, A. A. (2019). Perancangan Simulasi Sisttem Pergerakan Dengan Pengontrolan Pneumatik Untuk Mesin Pengamplas Kayu Otomatis. Jurnal Rekayasa Sriwijaya No.3 Vol.18, 21-28.

Andika, Renaldo, A., & Harasi, A. A. (2019). PROYEK AKHIR RANCANG BANGUN MESIN PENGEPRESS CUP SAMBAL. Bangka Belitung: POLITEKNIK MANUFAKTUR NEGERI BANGKA BELITUNG.

Anditha, F. I., & Wangkok YM, T. K. (2017).PERANCANGAN DAN SIMULASI ELEKTROPNEUMATIK. PROFISIENSI, Vol 5 No. 1 ;51-60,53.

Anhar, A. M., & Sakti, A. M. (2014). ANALISA HASIL PENGUJIAN MESIN CUP SEALER SEMI OTOMATIS. JRM. Volume 01 Nomor 03 Tahun 2014. 35 - 39, 36.

Ashaari, Z. b., Said, A. b., & Ngasman, N. A. (2019). Pembangunan Troli Elektro-Pneumatik Kit Bagi Meningkatkan Kefahaman Pelajar Terhadap Topik Elektro-Pneumatik Dalam Kursus Pneumatik & Hidraulik Di Jabatan Kejuruteraan Mekanikal Politeknik Merlimau. E-Jurnal Liga Ilmu Serantau Malaysia Indonesia, 56-66.

Baisrum, Setiadi, B., Jadmiko, S. W., Sudrajat, Wijayakusuma, V. A., & Raihan, F. Z. (2020). Solar Tracker Elektro-Pneumatik Berbasis Kendali Fuzzy. Rekayasa Hijau: Jurnal Teknologi Ramah Lingkungan Vol.4 No.3, 179-190.

Fahruddin, R. E. (2012). SIMULASI APLIKASI ELEKTRO PNEUMATIK DAN PLC SEBAGAI KENDALI PINTU GESER. Tugas Akhir Teknik Mesin Universitas Diponegoro, 22-24.

Hadmi, S. (2024). Sistem Kontrol Pneumatik. Kota Solok,Sumatra Barat: PT. MAFY MEDIA LITERASI INDONESIA.

Hartati, S., Musabbikhah, & Budiyani, K. (2021). Pelatihan Pengoperasian dan Perawatan Mesin Cup Sealer Otomatis untuk Meningkatkan usaha Jamu KUBE YARAISYA. 1st E-proceeding SENRIABDI- Seminar Nasional Hasil Riset dan Pengabdian kepada Masyarakat (pp. 761-769). Surakarta: Universitas Sahid Surakarta.

Hatuwa, A. N. (2014). Perancangan Instalasi Kontrol Gerak Silinder Elektropneumatik Berdasarkan Prinsip Kerja Metode Cascade. ARIKA, Vol.08, No.1, 53-64.

Jatilaksana, P. (2017). PEMANFAATAN PROGRAM FESTO FLUIDSIM SEBAGAI MEDIA PEMBELAJARAN UNTUK MENINGKATKAN HASIL BELAJAR PADA PEREKAYASA SISTEM ROBOTIK SISWA KELAS XI DI SMK TEXMACO SEMARANG. SKRIPSI Pendidikan Teknik Elektro Universitas Negeri Semarang, 16-20.

Kurniawan, R. (2008). Rekayasa rancang bangun sistem pemindahan material otomatis. Jurnal Ilmiah Teknik Mesin CAKRAM Vol. 2 No. 1, 42-47

Rahman, M. A., & Sakti, A. M. (n.d.). Rancang Bangun Mesin Cup Sealer Semi Otomatis. JRM. VOLUME 01 NOMOR 03, 29-34.

Saputra, M. D., Sumadi, & Sutisna, S. P. (2021). DESIGN SISTEM KONTROL ALAT PRESS EMPING MELINJO MENGGUNAKAN. Jurnal ALMIKANIKA Vol. 3 No.2, 51-56.

Sofnivagi, M. G., Razi, M., & Hasrin. (2020). RANCANG BANGUN SISTEM ELEKTRO PNEUMATIK UNTUK MESIN PENCETAK BIOBRIKET. JURNAL MESIN SAINS TERAPAN VOL. 4 NO. 1, 45-49.

Sunaryo, W., & Dewanto M.T, D. (2023). RANCANG ULANG MESIN SEALER CUP SEMI OTOMATIS. Jurnal Teknologi Industri. Vol 12. No.1, 40-49.

Turhanum, Azhar, & Finawan, A. (2017). RANCANG BANGUN PEMISAH BENDA LOGAM DAN NON LOGAM MENGGUNAKAN ELEKTRO PNEUMATIC. JURNAL TEKTRO, Vol.1, No.1, 42-48.

Verma, Y. K., & Tripathi, N. (2021). Analytical approach for hot packing machine on electro- pneumatic circuit with on-delay timer. Journal of Mathematical Problems, Equations and Statistics, 66 74.

Liu, W., & Sun, Q. (2021). Research on a design method of pneumatic logic control system. Measurement and Control (United Kingdom), 54(5– 6), 1105–1112. https://doi.org/10.1177/00202940211020336/

Sunaryo, W., & Dewanto, Y. (2023). RANCANG ULANG MESIN SEALER CUP SEMI OTOMATIS. JURNAL TEKNOLOGI INDUSTRI, 12(1). https://doi.org/10.35968/JTI.V12I1.1046

##submission.downloads##

Diterbitkan

2025-08-30

Cara Mengutip

Agnes Sholikhah, Ardit Mauladana, Ahmad Navis Hidayat, M Alfa Reza, & Edy Setiawan. (2025). Desain dan Simulasi Kontrol Elektropneumatik Pada Mesin Sealer Cup Semi Otomatis . JouLE (Journal of Electrical Engineering, 6(2), 59–65. Diambil dari https://journal.politeknikbosowa.ac.id/JOULE/article/view/799

Terbitan

Bagian

Artikel

Artikel paling banyak dibaca berdasarkan penulis yang sama